Add PCSX2 support

Thanks to @gorshco

system/pcsx2/PCSX2_keys.ini.default

@@ -0,0 +1,113 @@
+# IMPORTANT: PCSX2 only looks for PCSX2_keys.ini at the inis folder.
+# You should first copy PCSX2_keys.ini.default to the inis folder, then
+# rename it to PCSX2_keys.ini, and then edit it.
+
+# Important: PAD bindings will override shortcuts at this file.
+
+# IMPORTANT: GSdx has fixed shortcuts. Make sure your shortcuts don't conflict.
+# Also, they will affect GSdx also when alt/ctrl/shift are pressed, so it's
+# best to completely avoid them at this file. GSdx uses:
+# F5         - Deinterlace modes
+# PAGE_UP    - FXAA antialiasing (HW and SW)
+# PAGE_DOWN  - Cycles through dither modes (HW) 
+# DELETE     - Software Antialiasing (AA1)
+# HOME       - FX shader
+# INSERT     - Hardware mipmapping
+
+# -----------------------------------------------------------------------------
+# The KB shortcuts can be a normal key (e.g. f or ] etc) or a combination of
+# ALT/SHIFT/CTRL and a key, separated with a - or + (e.g. m or alt+ctrl+m or
+# alt-F12). Number (key) pad names start with KP_ (e.g. KP_0 to KP_9, KP_ADD).
+
+# Note: If the Dev console source is enabled, keypresses (including with Alt
+# etc) will be printed to the console and could be copied to PCSX2_keys.ini .
+
+# List of special key names (beyond KP_0 to KP_9 and normal keys):
+# DEL DELETE BACK INS INSERT ENTER RETURN PGUP PGDN LEFT RIGHT UP DOWN HOME END
+# SPACE TAB ESC ESCAPE CANCEL CLEAR MENU PAUSE CAPITAL SELECT PRINT EXECUTE
+# SNAPSHOT HELP ADD SEPARATOR SUBTRACT DECIMAL DIVIDE NUM_LOCK SCROLL_LOCK
+# PAGEUP PAGEDOWN KP_SPACE KP_TAB KP_ENTER KP_HOME KP_LEFT KP_UP KP_RIGHT
+# KP_DOWN KP_PRIOR KP_PAGEUP KP_NEXT KP_PAGEDOWN KP_END KP_BEGIN KP_INSERT
+# KP_DELETE KP_EQUAL KP_MULTIPLY KP_ADD KP_SEPARATOR KP_SUBTRACT KP_DECIMAL
+# KP_DIVIDE WINDOWS_LEFT WINDOWS_RIGHT WINDOWS_MENU COMMAND
+
+# save state: freeze is save state, defrost is load state.
+States_FreezeCurrentSlot          = F1
+States_DefrostCurrentSlot         = F3
+States_DefrostCurrentSlotBackup   = Shift-F3
+States_CycleSlotForward           = F2
+States_CycleSlotBackward          = Shift-F2
+
+Frameskip_Toggle                  = Shift-F4
+Framelimiter_TurboToggle          = TAB
+Framelimiter_SlomoToggle          = Shift-TAB
+Framelimiter_MasterToggle         = F4
+
+FullscreenToggle                  = Alt-ENTER
+
+# Note: toggles suspend, but can resume only if the GS window is not set to hide
+# when paused (Emu options -> GS window), and when the GS window is focused.
+Sys_SuspendResume                 = ESC
+
+# Screenshot. Note: must not include shift or ctrl. With these held - it will
+# create debug GS dump. The two other shortcuts will be added automatically.
+Sys_TakeSnapshot                  = F8
+
+# Hardware/software rendering toggle
+Sys_RenderswitchToggle            = F9
+
+Sys_LoggingToggle                 = F10
+# The FreezeGS function is currently disabled internally.
+Sys_FreezeGS                      = F11
+Sys_RecordingToggle               = F12
+
+GSwindow_CycleAspectRatio         = F6
+
+# Whole picture zoom in/out
+GSwindow_ZoomIn                   = Ctrl-KP_ADD
+GSwindow_ZoomOut                  = Ctrl-KP_SUBTRACT
+GSwindow_ZoomToggle               = Ctrl-KP_MULTIPLY
+
+# Vertical stretch/squash
+GSwindow_ZoomInY                  = Alt-Ctrl-KP_ADD
+GSwindow_ZoomOutY                 = Alt-Ctrl-KP_SUBTRACT
+GSwindow_ZoomResetY               = Alt-Ctrl-KP_MULTIPLY
+
+# Move the whole image
+GSwindow_OffsetYminus             = Alt-Ctrl-UP
+GSwindow_OffsetYplus              = Alt-Ctrl-DOWN
+GSwindow_OffsetXminus             = Alt-Ctrl-LEFT
+GSwindow_OffsetXplus              = Alt-Ctrl-RIGHT
+GSwindow_OffsetReset              = Alt-Ctrl-KP_DIVIDE
+
+# Recording Bindings
+# Note - These are disabled if 'System > Enable Recording Tools' is disabled
+FrameAdvance                      =	SPACE
+TogglePause                       =	Shift-P
+InputRecordingModeToggle          =	Shift-R
+
+# Note - This is disabled if no input recording is active
+GoToFirstFrame                    =	Shift-L
+
+# Save State Management
+# Note - These are disabled if 'System > Enable Recording Tools' is disabled
+States_SaveSlot0                  =	Shift-KP_0
+States_SaveSlot1                  =	Shift-KP_1
+States_SaveSlot2                  =	Shift-KP_2
+States_SaveSlot3                  =	Shift-KP_3
+States_SaveSlot4                  =	Shift-KP_4
+States_SaveSlot5                  =	Shift-KP_5
+States_SaveSlot6                  =	Shift-KP_6
+States_SaveSlot7                  =	Shift-KP_7
+States_SaveSlot8                  =	Shift-KP_8
+States_SaveSlot9                  =	Shift-KP_9
+States_LoadSlot0                  =	KP_0
+States_LoadSlot1                  =	KP_1
+States_LoadSlot2                  =	KP_2
+States_LoadSlot3                  =	KP_3
+States_LoadSlot4                  =	KP_4
+States_LoadSlot5                  =	KP_5
+States_LoadSlot6                  =	KP_6
+States_LoadSlot7                  =	KP_7
+States_LoadSlot8                  =	KP_8
+States_LoadSlot9                  =	KP_9

system/pcsx2/docs/PCSX2.1

@@ -0,0 +1,189 @@
+.\" Copyright 2002-2017 PCSX2 Dev Team
+.\"
+.\" This is free documentation; you can redistribute it and/or
+.\" modify it under the terms of the GNU General Public License as
+.\" published by the Free Software Foundation; either version 3 of
+.\" the License, or (at your option) any later version.
+.\"
+.\" The GNU General Public License's references to "object code"
+.\" and "executables" are to be interpreted as the output of any
+.\" document formatting or typesetting system, including
+.\" intermediate and printed output.
+.\"
+.\" This manual is distributed in the hope that it will be useful,
+.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+.\" GNU General Public License for more details.
+.\"
+.\" You should have received a copy of the GNU General Public
+.\" License along with this manual; if not, see
+.\" http://www.gnu.org/licenses.
+.Dd January 10, 2017
+.Dt PCSX2 1
+.Os
+.Sh NAME
+.Nm PCSX2
+.Nd PlayStation(R)2 Console Emulator
+.Sh SYNOPSIS
+.Nm
+.Op Fl h
+.Op Fl \-cfg Ns = Ns Ar file
+.Op Fl \-cfgpath Ns = Ns Ar path
+.Op Fl \-console
+.Op Fl \-forcewiz
+.Op Fl \-portable
+.Op Fl \-profiling
+.Op Fl \-elf Ns = Ns Ar file
+.Op Fl \-irx Ns = Ns Ar file
+.Op Fl \-nogui
+.Op Fl \-noguiprompt
+.Op Fl \-nodisc
+.Op Fl \-usecd
+.Op Fl \-fullscreen
+.Op Fl \-windowed
+.Op Fl \-nohacks
+.Op Fl \-fullboot
+.Op Fl \-gamefixes Ns = Ns Ar string
+.Op Fl \-gs Ns = Ns Ar file
+.Op Fl \-pad Ns = Ns Ar file
+.Op Fl \-spu2 Ns = Ns Ar file
+.Op Fl \-cdvd Ns = Ns Ar file
+.Op Fl \-usb Ns = Ns Ar file
+.Op Fl \-fw Ns = Ns Ar file
+.Op Fl \-dev9 Ns = Ns Ar file
+.Op Ar iso
+.Sh DESCRIPTION
+.Nm
+is an open-source PlayStation 2 (AKA PS2) emulator.
+Its purpose is to emulate the PS2 hardware, using a combination of MIPS CPU
+interpreters, recompilers and a virtual machine that manages hardware states and
+PS2 memory.
+This allows you to play PS2 games on your PC, with many additional features and
+benefits.
+.Sh GENERAL OPTIONS
+.Bl -tag -width Ds
+.It Fl h , Fl \-help
+Displays the list of available command line options.
+.It Fl \-cfg Ns = Ns Ar file
+Uses
+.Ar file
+instead of PCSX2_vm.ini as the configuration file.
+It does not affect plugins.
+.It Fl \-cfgpath Ns = Ns Ar path
+Specifies
+.Ar path
+as the configuration file path.
+It affects both
+.Nm
+and the plugins.
+.It Fl \-console
+Forces the program log to be visible.
+.It Fl \-forcewiz
+Forces the First-Time Wizard to run.
+.It Fl \-portable
+Runs
+.Nm
+in portable mode.
+.It Fl \-profiling
+Makes it easier to use profiling tools.
+.El
+.Sh AUTO-RUN OPTIONS
+.Bl -tag -width Ds
+.It Ar iso
+Loads and runs
+.Ar iso
+at startup using the
+.Nm
+internal ISO loader.
+.It Fl \-elf Ns = Ns Ar file
+Executes
+.Ar file
+as an ELF image.
+.It Fl \-irx Ns = Ns Ar file
+Executes
+.Ar file
+as an IRX image.
+.It Fl \-nogui
+Disables display of the GUI while running games.
+.Nm
+will terminate when the game window is closed.
+.It Fl \-noguiprompt
+Prompt before exiting when
+.Fl \-nogui
+is used.
+.It Fl \-nodisc
+Boots with an empty DVD tray.
+Use this to boot into the PS2 system menu.
+.It Fl \-usecd
+Boots using the configured CDVD plugin instead of booting
+.Ar iso .
+.It Fl \-fullscreen
+Runs the game in fullscreen mode.
+.It Fl \-windowed
+Runs the game in windowed mode.
+.El
+.Sh COMPATIBILITY OPTIONS
+.Bl -tag -width Ds
+.It Fl \-nohacks
+Disables all speedhacks.
+.It Fl \-fullboot
+Disables the fast boot feature.
+.It Fl \-gamefixes= Ns Ar string
+Enable specific gamefixes for this session.
+.Ar string
+is a comma-separated list of gamefixes.
+.Pp
+Valid gamefixes: VuAddSub, VuClipFlag, FpuCompare, FpuMul, FpuNegDiv, XGKick,
+IpuWait, EETiming, SkipMpeg, OPHFlag, DMABusy,VIFFIFO, VIF1Stall, GIFFIFO,
+FMVinSoftware, GoemonTlb, ScarfaceIbit.
+.El
+.Sh PLUGIN OVERRIDES
+.Bl -tag -width Ds
+.It Fl \-gs Ns = Ns Ar file
+Uses
+.Ar file
+as the GS plugin.
+.It Fl \-pad Ns = Ns Ar file
+Uses
+.Ar file
+as the PAD plugin.
+.It Fl \-spu2 Ns = Ns Ar file
+Uses
+.Ar file
+as the SPU2 plugin.
+.It Fl \-cdvd Ns = Ns Ar file
+Uses
+.Ar file
+as the CDVD plugin.
+.It Fl \-usb Ns = Ns Ar file
+Uses
+.Ar file
+as the USB plugin.
+.It Fl \-fw Ns = Ns Ar file
+Uses
+.Ar file
+as the FW plugin.
+.It Fl \-dev9 Ns = Ns Ar file
+Uses
+.Ar file
+as the DEV9 plugin.
+.El
+.Sh FILES
+.Bl -tag -width Ds
+.It $XDG_CONFIG_DIR/PCSX2 or $HOME/PCSX2
+User configuration and data directory.
+.El
+.Sh AUTHORS
+.An PCSX2 Dev Team and many other contributors
+.Sh BUGS
+Bugs can be reported by submitting an issue at the
+.Lk https://github.com/PCSX2/pcsx2/issues "PCSX2 GitHub issue tracker" .
+.Sh PCSX2 RELATED WEBSITES
+.Bl -bullet
+.It
+.Lk http://github.com/PCSX2/pcsx2 "PCSX2 git repository"
+.It
+.Lk http://pcsx2.net "PCSX2 website"
+.It
+.Lk http://forums.pcsx2.net "PCSX2 forums"
+.El

system/pcsx2/docs/debugger.txt

@@ -0,0 +1,43 @@
+disassembly view:
+     
+    ctrl+g          goto
+    ctrl+e          edit breakpoint
+    ctrl+d          enable/disable breakpoint
+    ctrl+b          add breakpoint
+    right           follow branch/position memory view to accessed address
+    left            go back one branch level/goto pc
+    up              move cursor up one line
+    down            move cursor down one line
+    page up         move visible area up one page
+    page down       move visible area down one page
+    f10             step over
+    f11             step into
+    tab             toggle display symbols
+    left click      select line/toggle breakpoint if line is already highlighted
+    right click     open context menu
+     
+memory view:
+     
+    ctrl+g          goto
+    ctrl+b          add breakpoint
+    left            move cursor back one byte/nibble
+    right           move cursor ahead one byte/nibble
+    up              move cursor up one line
+    down            move cursor down one line
+    page up         move cursor up one page
+    page down       move cursor down one page
+    0-9,A-F         overwrite hex nibble
+    any             overwrite ansi byte
+    left click      select byte/nibble
+    right click     open context menu
+    ctrl+wheel      zoom memory view
+    esc             return to previous goto address
+    ctrl+v          paste a hex string into memory
+
+breakpoint list:
+
+    up              select previous item
+    down            select next item
+    delete          remove selected breakpoint
+    return          edit selected breakpoint
+    space           toggle enable state of selected breakpoint

system/pcsx2/inis/PCSX2_ui.ini

@@ -0,0 +1,163 @@
+MainGuiPosition=488,488
+SysSettingsTabName=Cpu
+McdSettingsTabName=none
+ComponentsTabName=BIOS
+AppSettingsTabName=none
+GameDatabaseTabName=none
+LanguageId=0
+LanguageCode=default
+RecentIsoCount=20
+GzipIsoIndexTemplate=$(f).pindex.tmp
+Listbook_ImageSize=32
+Toolbar_ImageSize=24
+Toolbar_ShowLabels=enabled
+CurrentIso=
+CurrentBlockdump=
+CurrentELF=
+CurrentIRX=
+EnableSpeedHacks=enabled
+EnableGameFixes=disabled
+EnableFastBoot=enabled
+EnablePresets=enabled
+PresetIndex=1
+AskOnBoot=disabled
+McdCompressNTFS=enabled
+CdvdSource=ISO
+[wxWindows]
+[wxWindows/FontMapper]
+[wxWindows/FontMapper/Charsets]
+UTF-8=-1
+[wxWindows/FontMapper/Charsets/Aliases]
+UTF-8=
+[MemoryCards]
+Slot1_Enable=enabled
+Slot1_Filename=Mcd001.ps2
+Slot2_Enable=enabled
+Slot2_Filename=Mcd002.ps2
+Multitap1_Slot2_Enable=disabled
+Multitap1_Slot2_Filename=Mcd-Multitap1-Slot02.ps2
+Multitap1_Slot3_Enable=disabled
+Multitap1_Slot3_Filename=Mcd-Multitap1-Slot03.ps2
+Multitap1_Slot4_Enable=disabled
+Multitap1_Slot4_Filename=Mcd-Multitap1-Slot04.ps2
+Multitap2_Slot2_Enable=disabled
+Multitap2_Slot2_Filename=Mcd-Multitap2-Slot02.ps2
+Multitap2_Slot3_Enable=disabled
+Multitap2_Slot3_Filename=Mcd-Multitap2-Slot03.ps2
+Multitap2_Slot4_Enable=disabled
+Multitap2_Slot4_Filename=Mcd-Multitap2-Slot04.ps2
+[ProgramLog]
+Visible=enabled
+AutoDock=enabled
+DisplayPosition=1519,488
+DisplaySize=680,560
+FontSize=8
+Theme=Default
+[Folders]
+UseDefaultBios=enabled
+UseDefaultSnapshots=enabled
+UseDefaultSavestates=enabled
+UseDefaultMemoryCards=enabled
+UseDefaultLogs=enabled
+UseDefaultLangs=enabled
+UseDefaultPluginsFolder=enabled
+UseDefaultCheats=enabled
+UseDefaultCheatsWS=enabled
+Bios=bios
+Snapshots=snaps
+Savestates=sstates
+MemoryCards=memcards
+Logs=logs
+Langs=Langs
+Cheats=cheats
+CheatsWS=cheats_ws
+PluginsFolder=plugins
+RunIso=\\Documents\\PCSX2
+RunELF=\\Documents\\PCSX2
+RunDisc=
+[Filenames]
+GS=GSdx32-AVX2.dll
+BIOS=SCPH-70004.BIN
+[GSWindow]
+CloseOnEsc=enabled
+DefaultToFullscreen=disabled
+AlwaysHideMouse=disabled
+DisableResizeBorders=disabled
+DisableScreenSaver=enabled
+WindowSize=640,480
+WindowPos=-1,-1
+IsMaximized=disabled
+IsFullscreen=disabled
+EnableVsyncWindowFlag=disabled
+IsToggleFullscreenOnDoubleClick=enabled
+AspectRatio=4:3
+FMVAspectRatioSwitch=Off
+Zoom=100.00
+[Framerate]
+NominalScalar=1.00
+TurboScalar=2.00
+SlomoScalar=0.50
+SkipOnLimit=disabled
+SkipOnTurbo=disabled
+[InputRecording]
+VirtualPadPosition=-1,-1
+[Capture]
+EnableAudio=enabled
+[UiTemplates]
+LimiterUnlimited=Max
+LimiterTurbo=Turbo
+LimiterSlowmo=Slowmo
+LimiterNormal=Normal
+OutputFrame=Frame
+OutputField=Field
+OutputProgressive=Progressive
+OutputInterlaced=Interlaced
+Paused=<PAUSED> 
+TitleTemplate=Slot: ${slot} | Speed: ${speed} (${vfps}) | ${videomode} | Limiter: ${limiter} | ${gsdx} | ${omodei} | ${cpuusage}
+RecordingTemplate=Slot: ${slot} | Frame: ${frame}/${maxFrame} | Rec. Mode: ${mode} | Speed: ${speed} (${vfps}) | Limiter: ${limiter}
+[ConsoleLogSources]
+Devel=disabled
+.EEout=enabled
+.IOPout=enabled
+.EErecPerf=disabled
+.ELF=disabled
+.SysEvents=disabled
+.p\&xThread=disabled
+.SYSout=disabled
+.Input\ Recording=disabled
+.Controller\ Info=disabled
+[TraceLogSources]
+.SIF=disabled
+EE.Bios=disabled
+EE.Memory=disabled
+EE.Disasm.R5900=disabled
+EE.Disasm.COP0=disabled
+EE.Disasm.FPU=disabled
+EE.Disasm.VUmacro=disabled
+EE.Disasm.Cache=disabled
+EE.Registers.HwRegs=disabled
+EE.Registers.UnknownRegs=disabled
+EE.Registers.DmaRegs=disabled
+EE.Registers.IPU=disabled
+EE.GIFtags=disabled
+EE.VIFcodes=disabled
+EE.MSKPATH3=disabled
+EE.Events.DmaCtrl=disabled
+EE.Events.Counters=disabled
+EE.Events.MFIFO=disabled
+EE.Events.VIF=disabled
+EE.Events.GIF=disabled
+IOP.Bios=disabled
+IOP.Memorycards=disabled
+IOP.Pad=disabled
+IOP.Disasm.R3000A=disabled
+IOP.Disasm.Memory=disabled
+IOP.Registers.HwRegs=disabled
+IOP.Registers.UnknownRegs=disabled
+IOP.Registers.DmaRegs=disabled
+IOP.Events.DmaCrl=disabled
+IOP.Events.Counters=disabled
+IOP.Events.CDVD=disabled
+IOP.Events.MDEC=disabled
+[TraceLogSources/IOP.Disasm.COP2]
+GPU=disabled

system/pcsx2/inis/PCSX2_vm.ini

@@ -0,0 +1,98 @@
+[EmuCore]
+CdvdVerboseReads=disabled
+CdvdDumpBlocks=disabled
+CdvdShareWrite=disabled
+EnablePatches=enabled
+EnableCheats=disabled
+EnableIPC=disabled
+EnableWideScreenPatches=disabled
+EnableRecordingTools=disabled
+ConsoleToStdio=disabled
+HostFs=disabled
+FullBootConfig=disabled
+BackupSavestate=enabled
+McdEnableEjection=enabled
+McdFolderAutoManage=enabled
+MultitapPort0_Enabled=disabled
+MultitapPort1_Enabled=disabled
+[EmuCore/Speedhacks]
+EECycleRate=0
+EECycleSkip=0
+fastCDVD=disabled
+IntcStat=enabled
+WaitLoop=enabled
+vuFlagHack=enabled
+vuThread=disabled
+vu1Instant=enabled
+[EmuCore/CPU]
+FPU.DenormalsAreZero=enabled
+FPU.FlushToZero=enabled
+FPU.Roundmode=3
+VU.DenormalsAreZero=enabled
+VU.FlushToZero=enabled
+VU.Roundmode=3
+[EmuCore/CPU/Recompiler]
+EnableEE=enabled
+EnableIOP=enabled
+EnableEECache=disabled
+EnableVU0=enabled
+EnableVU1=enabled
+UseMicroVU0=enabled
+UseMicroVU1=enabled
+vuOverflow=enabled
+vuExtraOverflow=disabled
+vuSignOverflow=disabled
+vuUnderflow=disabled
+fpuOverflow=enabled
+fpuExtraOverflow=disabled
+fpuFullMode=disabled
+StackFrameChecks=disabled
+PreBlockCheckEE=disabled
+PreBlockCheckIOP=disabled
+[EmuCore/GS]
+SynchronousMTGS=disabled
+VsyncQueueSize=2
+FrameLimitEnable=enabled
+FrameSkipEnable=disabled
+VsyncEnable=0
+LimitScalar=1.00
+FramerateNTSC=59.94
+FrameratePAL=50.00
+FramesToDraw=2
+FramesToSkip=2
+[EmuCore/Gamefixes]
+VuAddSubHack=disabled
+FpuCompareHack=disabled
+FpuMulHack=disabled
+FpuNegDivHack=disabled
+XgKickHack=disabled
+IPUWaitHack=disabled
+EETimingHack=disabled
+SkipMPEGHack=disabled
+OPHFlagHack=disabled
+DMABusyHack=disabled
+VIFFIFOHack=disabled
+VIF1StallHack=disabled
+GIFFIFOHack=disabled
+GoemonTlbHack=disabled
+ScarfaceIbit=disabled
+CrashTagTeamRacingIbit=disabled
+VU0KickstartHack=disabled
+[EmuCore/Profiler]
+Enabled=disabled
+RecBlocks_EE=enabled
+RecBlocks_IOP=enabled
+RecBlocks_VU0=enabled
+RecBlocks_VU1=enabled
+[EmuCore/Debugger]
+ShowDebuggerOnStart=disabled
+AlignMemoryWindowStart=enabled
+FontWidth=8
+FontHeight=12
+WindowWidth=1316
+WindowHeight=2060
+MemoryViewBytesPerRow=16
+[EmuCore/TraceLog]
+Enabled=disabled
+EE.bitset=0
+IOP.bitset=0

system/pcsx2/portable.ini

@@ -0,0 +1 @@
+RunWizard=0

system/pcsx2/shaders/GSdx_FX_Settings.ini

@@ -0,0 +1,195 @@
+/*===============================================================================*\
+|########################      [GSdx FX Suite v2.40]      ########################|
+|##########################        By Asmodean          ##########################|
+||                                                                               ||
+||          This program is free software; you can redistribute it and/or        ||
+||          modify it under the terms of the GNU General Public License          ||
+||          as published by the Free Software Foundation; either version 2       ||
+||          of the License, or (at your option) any later version.               ||
+||                                                                               ||
+||          This program is distributed in the hope that it will be useful,      ||
+||          but WITHOUT ANY WARRANTY; without even the implied warranty of       ||
+||          MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        ||
+||          GNU General Public License for more details. (c)2016                 ||
+||                                                                               ||
+|#################################################################################|
+\*===============================================================================*/
+//#NOTICE: GSdx FX is not compatible with GSdx9. Use GSdx OGL or DX10/11.
+
+/*------------------------------------------------------------------------------
+                       [DEFINITIONS & ON/OFF OPTIONS]
+------------------------------------------------------------------------------*/
+
+//--------------------------#[CHOOSE EFFECTS]#--------------------------------\\
+
+//#[ANTIALIASING TECHNIQUES]   [1=ON|0=OFF]  #READ: For best results: Use gsdx fx antialiasing OR filtering. Not both together.
+#define UHQ_FXAA                    0      //# High Quality Fast Approximate Anti Aliasing. If GSdx's internal FXAA is also enabled, this equals FXAA2x.[3D]
+
+//#[FS SCALING TECHNIQUES]    [1=ON|0=OFF]  #READ: For best results: Only enable one type of filtering at one time. Use post antialiasing OR FS filtering, not both.
+#define BILINEAR_FILTERING          0     //# Bilinear Fullscreen Texture Filtering. BiLinear filtering - light to medium filtering of textures.[2D]
+#define BICUBIC_FILTERING           0     //# Bicubic Fullscreen Texture Filtering. BiCubic filtering - medium to strong filtering of textures.[2D]
+#define GAUSSIAN_FILTERING          0     //# Gaussian Fullscreen Texture Filtering. Gaussian filtering - strong to extra strong filtering of textures.[2D]
+#define BICUBLIC_SCALER             0     //# Bicubic Interpolation Scaling. Uses BCS on up scaling, and downsampling of games, for smoother scaling.
+#define LANCZOS_SCALER              0     //# Lanczos Interpolation Scaling. Uses Lanczos on up scaling, and downsampling of games for smoother scaling.
+
+//#[LIGHTING & COLOUR]         [1=ON|0=OFF]  #READ: These can all be turned on & off independently of each other. [For High Dynamic Range(HDR) use Bloom & Tonemapping together]
+#define BLENDED_BLOOM               1      //# High Quality SP Bloom. Soft lighting with blending techniques, for a natural looking bloom.
+#define SCENE_TONEMAPPING           1      //# HDR Scene Tonemapping. Layered component conversion, and applies scene tone mapping.
+#define COLOR_CORRECTION            0      //# Component Color Correction. Colorspace conversion, with correction curves, and multiple palette types.
+#define CROSS_PROCESSING            0      //# Filmic Cross Processing. Alters the tone of the scene, crossing the game's color set, with another.
+#define GAMMA_CORRECTION            0      //# RGB Gamma Correction. Fixed expansion to variable compression gamma correction curve.
+#define PIXEL_VIBRANCE              0      //# Pixel Vibrance. Intelligently adjusts pixel vibrance depending on original color saturation.
+#define COLOR_GRADING               0      //# Post-Complement Colour Grading. Alters individual colour components on a scene, to enhance selected colour tones.
+#define TEXTURE_SHARPEN             0      //# Bicubic Texture Unsharpen Mask. Looks similar to a negative texture LOD bias. Enhances texture fidelity.
+#define CURVE_CONTRAST              0      //# S-Curve Scene Contrast Enhancement. Locally adjusts contrast using a four-point cubic bezier spline.
+#define CEL_SHADING                 0      //# PX Cel Shading. Simulates the look of animation/toon. Typically best suited for animated style games.
+#define PAINT_SHADING               0      //# Paint Shading. Creates the effect of a painted scene. Adapted from ENB series, it's pretty performance heavy. 
+#define COLOR_TEMPERATURE           0      //# White Point Temperature. Changes the temperature of the image from D65 white point reference.
+
+//#[TV EMU TECHNIQUES]         [1=ON|0=OFF]  #READ: These can all be turned on & off independently of each other. These effects are typically used to simulated older TVs/CRT etc.
+#define LOTTES_CRT                  0     //# Timothy Lottes CRT emulation effect. Similar to scanlines, but with more control options. Ported by request.
+#define SCANLINES                   0     //# Scanlines to simulate the look of a CRT TV. Typically suited to sprite games. Note: Works best at Native Res.
+#define VIGNETTE                    0     //# Darkens the edges of the screen, to make it look more like it was shot with a camera lens.
+#define DEBANDING                   0     //# Applies a debanding effect, to minimize banding artifacts. Which is usually very prevalent in skyboxes (for example).
+#define SP_DITHERING                0     //# Subpixel Dithering to simulate more colors than your monitor can display. Smoothes gradiants, this can reduce color banding.
+#define PX_BORDER                   0     //# Creates a pixel border, as a workaround for the bright edge that using hardware antialiasing(MSAA) can cause. (Ported by request from SFX).
+
+/*------------------------------------------------------------------------------
+                          [EFFECT CONFIG OPTIONS]
+------------------------------------------------------------------------------*/
+
+//##[UHQ_FXAA]
+#define FxaaSubpixMax 0.00                 //[0.00 to 1.00] Amount of subpixel aliasing removal. Higher values: softer. Lower values: sharper. 0.00: Edge only.
+#define FxaaQuality 4                      //[1|2|3|4] Overall Fxaa quality preset (pixel coverage). 1: Low, 2: Medium, 3: High, 4: Ultra.
+#define FxaaEarlyExit 1                    //[0 or 1] Use Fxaa early exit pathing. When enabled: Only luma edge pixels are antialiased. When disabled: the entire scene is antialiased(FSAA).
+
+//##[BILINEAR_FILTERING]
+#define FilterStrength 1.00                //[0.10 to 1.50] Bilinear filtering strength. Controls the overall strength of the filtering.
+#define OffsetAmount 0.0                   //[0.0 to 1.5] Pixel offset amount. If you want to use an st offset, 0.5 is generally recommended. 0.0 is off.
+
+//##[BICUBIC_FILTERING]
+#define Interpolation Triangular           //[CatMullRom, Bell, BSpline, Triangular, Cubic] Type of interpolation to use. From left to right is lighter<-->stronger filtering.
+#define BicubicStrength 0.75               //[0.10 to 1.50] Bicubic filtering strength. Controls the overall strength of the filtering.
+#define PixelOffset 0.0                    //[0.0 to 1.5] Pixel offset amount. If you want to use an st offset, 0.5 is generally recommended. 0.0 is off.
+
+//##[GAUSSIAN_FILTERING]
+#define FilterAmount 1.00                  //[0.10 to 1.50] Gaussian filtering strength. Controls the overall strength of the filtering.
+#define GaussianSpread 0.75                //[0.50 to 4.00] The filtering spread & offset levels. Controls the sampling spread of the filtering.
+
+//##[BLENDED BLOOM]
+#define BloomType BlendGlow                //[BlendGlow, BlendAddGlow, BlendAddLight, BlendScreen, BlendLuma, BlendOverlay] The type of blended bloom. Light<->Dark.
+#define BloomStrength 0.220                //[0.000 to 1.000] Overall strength of the bloom. You may want to readjust for each blend type.
+#define BlendStrength 1.000                //[0.000 to 1.000] Strength of the blending. This is a modifier based on bloom. 1.0 equates to 100% strength.
+#define BloomDefocus 2.000                 //[1.000 to 4.000] The initial bloom defocus value. Increases the softness of light, bright objects, etc.
+#define BloomWidth 3.200                   //[1.000 to 8.000] Width of the bloom. Adjusts the width of the spread and soft glow. Scales with BloomStrength.
+#define BloomReds 0.040                    //[0.000 to 1.000] Red channel correction of the bloom. Raising will increase the bloom of reds.
+#define BloomGreens 0.030                  //[0.000 to 1.000] Green channel correction of the bloom. Raising will increase the bloom of greens.
+#define BloomBlues 0.020                   //[0.000 to 1.000] Blue channel correction of the bloom. Raising will increase the bloom of blues.
+
+//##[SCENE TONEMAPPING]
+#define TonemapType 1                      //[0|1|2|3] The base tone mapping operator. 0 is LDR, 1 is HDR(original), 2 & 3 are Filmic HDR(slight grading).
+#define TonemapMask 0                      //[0 or 1] Enables an ALU tone masking curve. Produces a nice cinematic look. Suits some games more than others.
+#define MaskStrength 0.25                  //[0.000 to 1.000] Strength of the tone masking. Higher for a stronger effect. This is a dependency of TonemapMask.
+#define ToneAmount 0.300                   //[0.050 to 1.000] Tonemap strength (tone correction). Higher for stronger tone mapping, lower for lighter.
+#define BlackLevels 0.060                  //[0.000 to 1.000] Black level balance (shadow correction). Increase to deepen blacks, lower to lighten them.
+#define Exposure 1.000                     //[0.100 to 2.000] White correction (brightness). Higher values for more scene exposure, lower for less.
+#define Luminance 1.000                    //[0.100 to 2.000] Luminance average (luminance correction). Higher values will lower scene luminance average.
+#define WhitePoint 1.000                   //[0.100 to 2.000] Whitepoint average (wp lum correction). Higher values will lower the maximum scene white point.
+
+//##[COLOR CORRECTION]
+#define CorrectionPalette 1                //[1|2|3|4|5] The colorspace palette type. 1: RGB, 2: YXY, 3: XYZ, 4: HSV, 5: YUV. Each one will produce a different combination of shades & hues.
+#define ChannelR 1.20                      //[0.00 to 8.00] R(1), Y(2), X(3), H(4), Y(5) component channel varies with the colorspace used. Higher values increase correction strength.
+#define ChannelG 1.60                      //[0.00 to 8.00] G(1), X(2), Y(3), S(4), U(5) component channel varies with the colorspace used. Higher values increase correction strength.
+#define ChannelB 1.80                      //[0.00 to 8.00] B(1), Y(2), Z(3), V(4), V(5) component channel varies with the colorspace used. Higher values increase correction strength.
+#define PaletteStrength 2.00               //[0.00 to 4.00] The interpolated strength ratio between the base color, and the corrected color. Raise to increase saturation.
+
+//##[CROSS PROCESSING]
+#define FilmicProcess 1                    //[1|2|3] The color conversion type for the cross process. 1: cool, 2: warm, 3: dusk. You can achieve different results with each.
+#define RedShift 0.50                      //[0.10 to 1.00] Red color component shift of the filmic processing. Alters the red balance of the shift.
+#define GreenShift 0.50                    //[0.10 to 1.00] Green color component shift of the filmic processing. Alters the green balance of the shift.
+#define BlueShift 0.50                     //[0.10 to 1.00] Blue color component shift of the filmic processing. Alters the blue balance of the shift.
+#define ShiftRatio 0.50                    //[0.10 to 2.00] The blending ratio for the base color and the color shift. Higher for a stronger effect. 
+
+//##[TEXTURE SHARPEN]
+#define SharpenStrength 0.75               //[0.10 to 2.00] Strength of the texture sharpening effect. This is the maximum strength that will be used.
+#define SharpenClamp 0.015                 //[0.005 to 0.500] Reduces the clamping/limiting on the maximum amount of sharpening each pixel recieves. Raise this to reduce the clamping.
+#define SharpenBias 1.20                   //[0.50 to 4.00] Sharpening edge bias. Lower values for clean subtle sharpen, and higher values for a deeper textured sharpen.
+#define DebugSharpen 0                     //[0 or 1] Visualize the sharpening effect. Useful for fine-tuning. Best to disable other effects, to see edge detection clearly.
+
+//##[PIXEL VIBRANCE]
+#define Vibrance 0.10                      //[-1.00 to 1.00] Overall vibrance strength. Locally adjusts the vibrance of pixels depending on their original saturation.
+#define RedVibrance 1.00                   //[-8.00 to 8.00] Red channel coefficient of the vibrance strength. Adjusting the vibrance of the red channel independently.
+#define GreenVibrance 1.00                 //[-8.00 to 8.00] Green channel coefficient of the vibrance strength. Adjusting the vibrance of the green channel independently.
+#define BlueVibrance 1.00                  //[-8.00 to 8.00] Blue channel coefficient of the vibrance strength. Adjusting the vibrance of the blue channel independently.
+
+//##[COLOR_GRADING]
+#define RedGrading 1.20                    //[0.00 to 3.00] Red colour grading coefficient. Adjust to influence the red channel coefficients of the grading, and highlight tones.
+#define GreenGrading 1.10                  //[0.00 to 3.00] Green colour grading coefficient. Adjust to influence the Green channel coefficients of the grading, and highlight tones.
+#define BlueGrading 1.10                   //[0.00 to 3.00] Blue colour grading coefficient. Adjust to influence the Blue channel coefficients of the grading, and highlight tones.
+#define GradingStrength 0.25               //[0.00 to 1.00] The overall max strength of the colour grading effect. Raise to increase, lower to decrease the amount.
+#define Correlation 1.00                   //[0.10 to 1.00] Correlation between the base colour, and the grading influence. Lower = more of the scene is graded, Higher = less of the scene is graded.
+
+//##[COLOR TEMPERATURE]
+#define White_Point 6500.0                 //[2000.0 to 12000.0] Temperature value given in Kelvin. A typical CRT has a target white point temperature of D93 (9300K)
+
+//##[CEL SHADING]
+#define EdgeStrength 1.00                  //[0.00 to 4.00] Overall strength of the cel edge outline effect. Affects the overall density.  0.00: no outlines.
+#define EdgeFilter 0.75                    //[0.10 to 2.00] Filters out fainter cel edges. Use it for balancing the cel edge density. EG: for faces, foliage, etc.
+#define EdgeThickness 1.20                 //[0.50 to 2.00] Thickness of the cel edges. Increase for thicker outlining.  Note: when downsampling, raise this to keep the same thickness.
+#define UseYuvLuma 0                       //[0 or 1] Uses YUV luma calculations, or base color luma calculations. Yuv luma can produce a better shaded look.
+#define ColorRounding 0                    //[0 or 1] Uses rounding methods on colors. This can emphasise shaded toon colors. Looks good in some games, and odd in others.
+
+//##[PAINT SHADING]
+#define PaintMethod 2                      //[1 or 2] The algorithm used for paint effect. 1: water painting, 2: oil painting. You may want to readjust the radius between the two.
+#define PaintRadius 4                      //[2 to 8] Radius of the painted effect, increasing the radius also requires longer loops, so higher values require more performance.
+#define PaintStrength 1.00                 //[0.00 to 1.00] The overall interpolated strength of the paint effect. Where 1.0 equates to 100% strength.
+
+//##[CURVE_CONTRAST]
+#define CurveType 0                        //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma)
+#define CurvesContrast 0.35                //[0.00 to 2.00] The amount of contrast you want. Controls the overall strength of the texture sharpening.
+
+//##[GAMMA_CORRECTION]
+#define Gamma 2.20                         //[1.5 to 4.0] Gamma correction. Decrease for lower gamma(darker). Increase for higher gamma(brighter). (Default: 2.2)
+
+//##[LOTTES_CRT]
+#define MaskingType 1                      //[1|2|3|4] The type of CRT shadow masking used. 1: compressed TV style, 2: Aperture-grille, 3: Stretched VGA style, 4: VGA style.
+#define CRTSizeX 512.0                     //[128 to 2048] A workaround for arbitrary render target scaling. Either set it to a fixed width, or set it to screenSize.x
+#define CRTSizeY 448.0                     //[128 to 2048] A workaround for arbitrary render target scaling. Either set it to a fixed height, or set it to screenSize.y
+#define ScanBrightness -8.00               //[-16.0 to 1.0] The overall brightness of the scanline effect. Lower for darker, higher for brighter.
+#define FilterCRTAmount -1.00              //[-4.0 to 1.0] The amount of filtering used, to replicate the TV CRT look. Lower for less, higher for more.
+#define HorizontalWarp 0.00                //[0.0 to 0.1] The distortion warping effect for the horizontal (x) axis of the screen. Use small increments.
+#define VerticalWarp 0.00                  //[0.0 to 0.1] The distortion warping effect for the verticle (y) axis of the screen. Use small increments.
+#define MaskAmountDark 0.80                //[0.0 to 1.0] The value of the dark masking line effect used. Lower for darker lower end masking, higher for brighter.
+#define MaskAmountLight 1.50               //[0.0 to 2.0] The value of the light masking line effect used. Lower for darker higher end masking, higher for brighter.
+#define ResolutionScale 2.00               //[0.1 to 4.0] The scale of the image resolution. Lowering this can give off a nice retro TV look. Raising it can clear up the image.
+#define MaskResolutionScale 0.80           //[0.1 to 2.0] The scale of the CRT mask resolution. Use this for balancing the scanline mask scale for difference resolution scaling.
+#define UseShadowMask 1                    //[0 or 1] Enables, or disables the use of the CRT shadow mask. 0 is disabled, 1 is enabled.
+
+//##[SCANLINES]
+#define ScanlineType 0                     //[0|1|2] The type & orientation of the scanlines. 0 is x(horizontal), 1 is y(vertical), 2 is both(xy)
+#define ScanlineScale 0.50                 //[0.20 to 2.00] The scaling & thickness of the scanlines. Changing this can help with PCSX2 IR scaling problems.
+#define ScanlineIntensity 0.18             //[0.10 to 1.00] The intensity of the scanlines. Defaults: 0.18 for ScanlineType 0|1|2, 0.50 for ScanlineType 3.
+#define ScanlineBrightness 1.02            //[0.50 to 2.00] The brightness of the scanlines.  Defaults: 2.00 for ScanlineType 0|1|2, 1.50 for ScanlineType 3.
+
+//##[VIGNETTE]
+#define VignetteRatio 1.77                 //[0.15 to 6.00] Sets the espect ratio of the vignette. 1.77 for 16:9, 1.60 for 16:10, 1.33 for 4:3, 1.00 for 1:1.
+#define VignetteRadius 1.10                //[0.50 to 3.00] Radius of the vignette effect. Lower values for stronger radial effect from center
+#define VignetteAmount 0.25                //[0.00 to 1.00] Strength of black edge occlusion. Increase for higher strength, decrease for lower.
+#define VignetteSlope 12                   //[2|4|8|10|12|16] How far away from the center the vignetting will start.
+
+//##[SUBPIXEL DITHERING]
+#define DitherMethod 2                     //[1 or 2] 1: Ordered grid dithering(faster), 2: random dithering(higher quality). Hardware dithering is also enabled by default.
+#define ShowMethod 0                       //[0 or 1] Shows the dithering method, based of the type of dithering selected. Useful for debugging, and confirmation of working order.
+
+//##[DEBANDING]
+#define DebandRadius 32.0                  //[0.0 to 1024.0] Sampling radius, higher values will reduce further banding but might also reduce details.
+#define DebandThreshold 0.017              //[0.000 to 0.100] Threshold, higher values will reduce further banding but might also reduce details and increase noise.
+#define DebandSampleCount 4                //[1 to 8] Sample count, higher values are better. But also have a higher performance cost.
+#define DebandOffsetMode 3                 //[1|2|3] 1 = cross (axis aligned, fast), 2 = diagonal (45 degrees, slower), 3 = box (fully random, slower).
+#define DebandDithering 1                  //[0|1|2|3] Additional dithering options to smoothen the output. 0 = No dithering 1 = Ordered dithering, 2 = Random dithering, 3 = Iestyn's RGB dither (Valve).
+
+//##[PX_BORDER]
+#define BorderWidth float2(2, 2)           //[0 to 2048, 0 to 2048] (X,Y)-width of the border. Measured in pixels.
+#define BorderColor float3(0, 0, 0)        //[0 to 255, 0 to 255, 0 to 255] What color the border should be. In integer RGB colors, meaning 0,0,0 is black and 255,255,255 is full white.
+
+//[END OF USER OPTIONS]